We all wash our hands regularly because they are in contact with the rest of the world – shopping cart handles, doorknobs, money, toilet seats, other hands – the list goes on and on. We wash our hands to stay protected, it’s also a good idea to clean and sanitize your phone and tablets to continue that protection. Add to this that flu season is here. SNiPER is perfect for cleaning your devices because it is not corrosive and won’t cause harm to touch screens. Here’s how to use SNiPER to clean and sanitize your phone or tablet.

What you’ll need

– One or two clean, lint-free soft cloths that won’t scratch. A lens cloth is perfect, but you can also use microfiber cloths.
– Cotton swabs
-Sniper disinfectant

Here’s the process

First, remove any protective cover from the device.

No matter how careful you might be, you aren’t going to spray the phone directly, (but you can spray down the protector case later if needed). Instead of spraying the device directly, spray a corner of one of the cloths until it is damp. Take that damp cloth and wrap the damp bit around one or two of your fingers so that the wet bit is around your fingertips. Then you can use your wrapped fingertip to gently scrub down the screen of your device. If you scrub for at least 1 minute with the wet cloth, you can be satisfied that your phone/tablet screen is sanitized. Clean the back and sides if they need it.

Buy a Gallon of SNiPER Disinfectant & Odor Eliminator SNiPER Kills Mold
Buy a 32 oz spray bottle of SNiPER SNiPER Disinfectant 32 ounce

Other important bits to clean

Find the charging port and inspect it. If there is a lot of dust present, blow onto it gently. Don’t use compressed air because that can bend the tiny connecting wires. If that doesn’t get it, use the cotton swab very gently to wipe around the exterior of the port. If dust persists inside, where the connections are made, blow sharply into the port. Don’t use a toothpick to try and clean inside. It is far too easy to bend the connecting wires out of alignment, and then you’ll have a new problem!

Cleaning the case or protector is easy. You can spray it directly, or you can use the still damp cloth to wipe it down thoroughly. After everything has dried, you can put it all back together again. It’s easy to clean and sanitize your phone or tablet!

You can also use SNiPER to sanitize your computer mouse, keyboard and other devices. The same techniques of spraying the cloth – and not the device – will work perfectly.

Additional information here: https://blog.nokout.com/what-level-of-clean-is-right-for-you/