Great Idea! Here’s how.

Maybe your new puppy has had a few accidents on your carpet and it is beginning to smell bad. Or maybe you have a new baby that is soon to be crawling on your carpets or rugs and you’d like to disinfect them. There are many reasons you might want to use Nok-Out or SNiPER in your home carpet cleaning machine, and using either of them on your carpets and rugs can be a great idea. It will work just fine and can remove the odor or do a great job of sanitizing – or both. Remember that Nok-Out eliminates odors. SNiPER both eliminates the odors and sanitizes.

It doesn’t matter what type of machine you have – they all work more or less the same. Nok-Out and SNiPER are both non-corrosive and will not cause harm to the machine so they are perfectly safe. It’s easy to use Nok-Out or SNiPER in your home carpet cleaning machine. Best of all, it works great!

Deodorizing with Nok-Out or SNiPER

First – give your carpet a good vacuuming. Most of the ‘soils’ in your carpet are not water-soluble and vacuuming them up will prevent the formation of ‘mud’ when it gets wet. It’s a lot easier to pull that stuff out of your carpet while it is dry.

Next, you have to make a decision. If your carpet is really dirty and needs washing, then clean it first using your favorite carpet cleaning detergent and hot water. I think it is better to clean first – if needed – and deodorize or sanitize after. This eliminates the possibility of the detergent reacting unfavorably with Nok-Out or SNiPER (this is highly unlikely but better safe than sorry). Nok-Out or SNiPER will be able to do a better job of deodorizing or sanitizing when the grime is gone first. When you have finished the cleaning phase, the ‘best practice’ is to perform a clean water rinse to be doubly sure you are not leaving detergent residue behind.

Buy a Gallon of SNiPER Disinfectant & Odor Eliminator SNiPER Kills Mold
Buy a Gallon of Nok-Out Odor Eliminator NokOut Odor Eliminator

Maybe your carpet is fairly clean looking but has odor issues. In this case, you may not need to shampoo first, you can instead just focus on the next step when you are deodorizing using Nok-Out or SNiPER. We recommend a ratio of 4 (cold) water to 1 Nok-Out (or SNIPER) for deodorizing. It is highly unlikely that Nok-Out or SNiPER might cause color bleeding, but it is always a good idea to test this in an inconspicuous area first. This is especially true for natural fiber carpet or rugs. Use your machine slowly during this step. When finished, make a final pass that is vacuum only to try and get up as much of the liquid as possible. Put fans on the carpet to speed drying. In the summer, turn the AC down to a lower-than-normal temperature until the carpet has fully dried.

Sanitizing is quick and easy with SNiPER

For sanitizing, you can dilute SNiPER by 6 to 1. The process is the same as for simple deodorizing. Do not perform an additional ‘rinse only’ step at the end. For more information on the difference between sanitizing and disinfecting, see: http://blog.nokout.com/what-level-of-clean-is-right-for-you/.

So you see, using Nok-Out or SNiPER in your home carpet cleaning machine is easy and reliable. It can make a big dofference in your home. Give it a try! You’ll be glad you did!